Tascam DR-70D 4-channel audio recorder for DSLR cameras
 

• Compact, professional-grade audio recorder designed to be used in combination with a DSLR camera
• Uses an SD/SDHC/SDXC card as recording medium (up to 128 GB)
• High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
• NE5532 operational amplifiers for even higher audio performance (also used on DA-3000)
• In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
• Four channels can be mixed down to a stereo signal
• Recording levels can be adjusted independently for inputs 1–4
• Dual recording function allows two files to be recorded simultaneously at different levels
• Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
• Broadcast Wave Format (BWF) supported as WAV recording format
• Two built-in omnidirectional microphones
• Four XLR/TRS combo inputs can provide phantom power (+24V/+48V)
• +24 dBu maximum input level (20 dB headroom)
• Additional unbalanced input for channels 1 and 2 (stereo mini jack) supports mics that require plug-in power, allowing the input of video mics and other high-output mics
• Switchable low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)
• Switchable limiter to prevent clipping
• Audio can be output to a DSLR camera for recording
• Camera input enables convenient monitoring of audio from a DSLR camera
• Selectable mid-side decoding for use with MS microphone setups
• Slate tone functions (automatic/manual) to simplify synchronization of video files when editing
• A new file can be created during recording
• Selectable delay to eliminate time lags caused by differences in the distances of two input sources
• QUICK button allows easy access to various functions
• Slate tones can also be used for moving to specific locations
• Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
• File name format can be set to use a user-defined word or the date
• Resume function to memorize the playback position before the unit is turned off
• Line output and headphones output with individual level controls (3.5-mm jack)
• Dedicated remote control jack for use with RC-10 and RC-3F (sold separately)
• Hold switch to prevent accidental operation
• Low-noise buttons
• 128 x 64 pixel LC display with backlight
• USB 2.0 port
• Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
• DSLR bracket for easy camera attachment and removal
• Hot shoe mount (accessible when not using the DSLR bracket)
• Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
• Operates on four AA batteries, an AC adapter (sold separately: TASCAM PS-P515U), external battery pack (sold separately: TASCAM BP-6AA) or USB bus power